Sökningen fann 497 träffar
- 23 februari 2016 kl. 00:11
- Kategori: Projekt
- Tråd: BMW k1100 16v 1380 conversion
- Svar: 81
- Visningar: 62705
BMW k1100 16v 1380 conversion
After years of consideration and looking for the perfect solution which fitted my needs of more power, ease of conversion, fit within emission regulations and budget. I have considered a 7 port head with fuel injection, though i learned I would have problems with emissions by using a cam which suite...
- 5 januari 2016 kl. 00:29
- Kategori: Ordet är fritt
- Tråd: Hello
- Svar: 3
- Visningar: 3453
Re: Hello
One more non Swedish speaker!!
The guys here are so good at English so it isn't an issue.
The guys here are so good at English so it isn't an issue.
- 17 september 2015 kl. 13:24
- Kategori: Ordet är fritt
- Tråd: Mini Speed
- Svar: 2
- Visningar: 2807
Re: Mini Speed
no personal experience. Though threads at TMF suggest that minispeed are not meeting expectations
http://www.theminiforum.co.uk/forums/to ... +minispeed
http://www.theminiforum.co.uk/forums/to ... +minispeed
- 24 augusti 2015 kl. 22:01
- Kategori: Projekt
- Tråd: Lilla Rödluvans äventyr
- Svar: 90
- Visningar: 59363
Re: Lilla Rödluvans äventyr
and of course hundkoja.com members get a free sample…………..
- 14 augusti 2015 kl. 17:29
- Kategori: Ordet är fritt
- Tråd: Mini Spotting!
- Svar: 304
- Visningar: 203151
Re: Mini Spotting!
Have seen 2 minis these last 2 days. One (red) yesterday in Limhamn.
And one on Tuesday (red) just outside Eslöv, I was in the mini )I waved and beeped).
And one on Tuesday (red) just outside Eslöv, I was in the mini )I waved and beeped).
- 7 augusti 2015 kl. 14:25
- Kategori: Mekanik
- Tråd: plats på tändkablar
- Svar: 2
- Visningar: 2194
- 6 augusti 2015 kl. 17:03
- Kategori: Mekanik
- Tråd: BMW K1 Topp
- Svar: 7
- Visningar: 4456
Re: BMW K1 Topp
Needs lots of work, you need to "Pocket" the pistons to allow for the 16 valves. Drill the block to accept the head. Try to squeeze it under the bonnet, soince the head it too tall. Figure out fueling, since it is cross flow, you need the carbs/TBs at the front of the engine. You loose the...
- 21 maj 2015 kl. 22:54
- Kategori: Chassie
- Tråd: Vad har ni för bromsklossar?
- Svar: 11
- Visningar: 10376
- 21 maj 2015 kl. 22:36
- Kategori: Chassie
- Tråd: Vad har ni för bromsklossar?
- Svar: 11
- Visningar: 10376
Re: Vad har ni för bromsklossar?
I use the standard EBC pads, they are great, but I find they produce a lot of brake dust.
I have heard that the green stuff, really need to get to temperature to work properly.
There is good things being said about the new carbon metallic pads on "the mini forum"
I have heard that the green stuff, really need to get to temperature to work properly.
There is good things being said about the new carbon metallic pads on "the mini forum"
- 18 mars 2015 kl. 23:13
- Kategori: Mekanik
- Tråd: för höga avgas värde enligt spb
- Svar: 26
- Visningar: 18256
Re: för höga avgas värde enligt spb
you really need to see the fault codes, clearing them wont do much as they will come back. The key data is the live data as the car is running, and then you can get closer to the sensor / wiring even part of the ECU which is causing the problem. My SPI was running fine I thought, though i also had h...
- 18 mars 2015 kl. 21:06
- Kategori: Mekanik
- Tråd: för höga avgas värde enligt spb
- Svar: 26
- Visningar: 18256
Re: för höga avgas värde enligt spb
Have you tested the ECU for any fault codes?
- 17 mars 2015 kl. 16:10
- Kategori: Chassie
- Tråd: HILO REAR UNIT RODS för långa?
- Svar: 6
- Visningar: 4135
Re: HILO REAR UNIT RODS för långa?
I have been following your problem. I can't see how the rod can be too long. With the hilo wound down to its shortest, the rubber cone, hilo and the rod should literally be falling out of the subframe, when the wheel is off the ground. Does the rod go all the way into the hilo? Are you using spaced ...
- 16 mars 2015 kl. 23:13
- Kategori: Mekanik
- Tråd: Startproblem/verkstad
- Svar: 4
- Visningar: 3134
Re: Startproblem/verkstad
I can highly reccomend Steve and his staff at English car care as Crona says not cheap ( circa 800 per hour)
- 16 mars 2015 kl. 14:07
- Kategori: Projekt
- Tråd: It was never meant to be a project!!
- Svar: 67
- Visningar: 41891
Re: It was never meant to be a project!!
I bought it from a webstore here in Sweden, can't remember exactly which. it had horrible flames etched onto the chrome, so i covered in a bit of vinyl. http://i804.photobucket.com/albums/yy330/craig1407/9C74D66D-CDF9-454C-970A-EFF4AFC89CD3-5626-0000098F4FAF815A.jpg http://i804.photobucket.com/album...
- 15 mars 2015 kl. 23:08
- Kategori: Projekt
- Tråd: It was never meant to be a project!!
- Svar: 67
- Visningar: 41891
Re: It was never meant to be a project!!
Part 1 Well the mini has been tucked away since October. The weather starts to break, so i have decided to give the interior a freshen up. First up Smiths gauges in the dash. it was bit nerve raking drilling the holes into the dash. I have never seen a dash like it in anointed mini apart from other ...